stasadm

  nvme-stas 3.0

Name

stasadm — STorage Appliance Services admin functions

Synopsis

stasadm [OPTIONS…] {COMMAND} [OPTIONS…]

Description

stasadm is used to configure nvme-stas. The configuration is saved to /etc/stas/sys.conf.

Although nvme-stas’ configuration is saved to /etc/stas/sys.conf, it’s still possible to interoperate with the configuration of nvme-cli and libnvme. nvme-stas allows one to save individual parameters such as the Host NQN and ID outside of /etc/stas/sys.conf. This allows, for example, using the same default Host NQN and ID defined by nvme-cli and libnvme in /etc/nvme/hostnqn and /etc/nvme/hostid respectively. To tell nvme-stas that you want to use the those files, simply use stasadm’s --file=FILE option.

Commands

The following commands are understood:

hostnqn

Generate the Host NQN. This is typically used as a post installation step to generate /etc/nvme/hostnqn.

The NVMe base specification says: “An NQN is permanent for the lifetime of the host”. For this reason, the host NQN should only be generated if /etc/nvme/hostnqn does not exist already.

hostid

Generate the Host ID. This is typically used as a post installation step to generate /etc/nvme/hostid.

Although not explicitly specified in the NVMe specifications, the Host ID, like the Host NQN, should be permanent for the lifetime of the host. Only generate the Host ID if /etc/nvme/hostid does not exist.

set-symname [SYMNAME]

Set the host symbolic name.

The symbolic name is an optional parameter that can be used for explicit registration with a discovery controller.

clear-symname

Clear the host symbolic name.

Options

The following options are understood:

-h, --help

Print the help text and exit.

--version

Print the version string and exit.

-fFILE, --file=FILE

By default, hostnqn and hostid save the values to /etc/stas/sys.conf. This option allows saving to a separate file.

Traditionally, nvme-cli and libnvme retrieve the default Host NQN and ID from /etc/nvme/hostnqn and /etc/nvme/hostid respectively. The --file=FILE option can be used to tell nvme-stas that it should use those same configuration files.

Exit status

On success, 0 is returned; otherwise, a non-zero failure code is returned.

Examples

Example 1. Generate ``/etc/nvme/hostnqn``

$ stasadm hostnqn --file /etc/nvme/hostnqn

Example 2. Generate ``/etc/nvme/hostid``

$ stasadm hostid -f /etc/nvme/hostid

Example 3. Configure the host’s symbolic name

$ stasadm set-symname LukeSkywalker

See Also

nvme-stas(7)